The appearance of any product or product is due to its incomparable advantages, and YTP linear bearings are no exception. Here we will introduce the maintenance of YTP linear bearings in detail, and let's follow the editor to understand. Hope it helps everyone.
YTP linear bearings have no special requirements for mating shafts; they can withstand greater loads than metal bearings, but because the movement between the bearing and the shaft is sliding friction, the movement speed of plastic linear bearings is limited to a certain extent; the movement resistance is higher than that of metal linear bearings. Bearings are larger; but their movement noise is lower than that of metal linear bearings, especially in the case of medium and high speed, the noise of plastic linear bearings has little impact on the speed. Plastic linear bearings are allowed to be used in dusty occasions due to their internal chip removal groove design. During the movement, dust is automatically brought out of the friction surface of the bearing body from the chip removal groove; plastic linear bearings also allow the use of cleaning, and the inner sliding film made of special materials can even run for a long time in liquid.
YTP linear bearings are more and more widely used in electronic equipment, food machinery, packaging machinery, medical machinery, printing machinery, textile machinery, machinery, instrumentation, robots, tool machinery, numerical control machine tools, automobiles and digital 3D coordinate measuring equipment and other precision equipment or special machinery industry.
The maintenance of YTP linear bearings is mainly lubrication and friction: anti-corrosive oil is injected into the linear bearings. If grease is used, first remove the anti-corrosive oil with kerosene or organic solvent, and then add the grease after air drying. (It is recommended to use a lithium soap-based grease with a viscosity mark of N0.2.) If oil is used for lubrication, there is no need to remove the anti-corrosive oil. The lubricating oil of ISO viscosity grade VG15-100 can be selected according to the temperature change. The lubrication of the shaft can be oiled from the supply YouTube, or it can be obtained from the oil hole on the housing. Oil lubrication is not suitable for non-porous sealed bearings, because the seal will scrape off the oil. YTP linear bearing maintenance Since the sliding film inside the plastic linear bearing is made of self-lubricating plastic, no additional oil supply and maintenance is required during use; or the shaft is full of dust, no maintenance is required, and the dust will be automatically discharged from the chip removal groove during movement; only when the sliding film is worn can the internal sliding film be replaced directly; maintenance is very convenient.
The main purpose of this is that if you don't understand anything, you can call us at any time for consultation. When you enter the official website, you can see the contact information. You can also consult the online staff. They will help you solve some problems with the quotation method. We have professional staff here to answer the relevant professional knowledge for you. Welcome to consult and buy.
