As an important part of supporting and guiding motion, the THK linear guide can stop the reciprocating linear motion according to the given direction. If it depends on its resistance nature, it can be divided into sliding collision track, rolling collision track, sensitive collision track, etc. During operation, there is usually a bad cloud condition.
In particular, some guide rails have relatively large gaps, and the guide rails will swing to the side, thus creating undesirable noise between the sliders. Therefore, technicians insist on high alertness to the "missing signal" of linear guide bearings. It is good to use auditory recognition. With the increase in the market demand for linear guide rails, there are many products in China, and the demand is also increasing. Prevent the problem of linear guide rails during operation. However, regularly operate linear guide rails to prevent rust using mineral oil.
As one of the central components of the equipment, the guide rail and the linear axis play a guiding and supporting role. In order to ensure the high machining accuracy of the machine, it is required that the guide rail and the straight line have high guiding accuracy and good motion stability. During the operation of the equipment, due to the large amount of corrosive dust and smoke generated during the processing of the machined parts, a large amount of smoke and dust have been accumulated on the surface of the guide rail and the linear axis for a long time, which has a great impact on the processing accuracy of the equipment, and will form corrosion points on the surface of the linear axis of the guide rail, shortening the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of the product, it is necessary to do a good job in the daily maintenance of the guide rail and the linear axis.
